Parameter

Paving Width

3000-9000mm

Paving Thickness

20-320mm

Paving Speed

2.00~6.25m/min

Traveling Speed

0.96~2.86km/h

Engine Power

112kW

Hopper Capacity

12t

Max. Theoretical output

500t/h

Weight

16000~20500kg

Overall Size

6220*3270*3050mm

Engine

six cylinders, air cooled engine 112Kw/2300r/min

Drive System

The whole machine is driven mechanically-hydraulically. Flywheel end of engine is connected with transfer case. The front of engine is connected with split flow pumps to supply power to the components as follows:

1. crawler traveling devices

2. conveyor and screw feeder

3. tamper and vibrating device

4. hopper folded in & out, screed up & down and other cylinders action

Traveling Device

It is consisted of gear box, transfer case, traveling clutch and chain transmission.

The driven chain wheel activates the crawler.

Weight Bearing Mode

There are two crawlers. Crawler patches are configured with rubber. Each crawler ground touch area is 3050*300mm.

Steering

The traveling clutch is operated by hydraulic cylinder. The brake can make the machine turn at former place.

Hopper

The capacity is 12 tons and operated by hydraulic cylinder for entire discharge.

Push Roller

The roller can swing to push the truck rear wheels.

Conveyor

Left and right conveyor is independently driven. Clutch is controlled by hydraulic cylinder.

Feeder System

The system uses screw feeder which blades are of high wearable material and are easily replaced.

Electrical System

The system is equipped with two batteries. The voltage is 24V.

Canopy

It is consisted of steel tube and cloth.

Automatic Leveling Sensors

It has two longitudinal and one transverse leveling units, used for automatic adjustment of slope and grade.

Working Devices

Mechanical extended screed

1. Tamper impact

stroke 5mm

pressure 14Mpa

2. Extended screed

1.25mm 2 segments

1m 2 segments

0.5m 2 segments

0.25m 2 segments