Performance parameter

Basic paving width

2500mm

Maximum width of pavingMaximum thickness of paving

4500mm
250mm

Minimum thickness of paving

10mm

Traveling speed

2.29~16.74km/h

Paving speed

3.01~8.97m/min

Maximum theoretic productivity

220t/h

Hopper capacity

10t

Maximum climbing capacity

load 10%, unload 15%

Mass

11000kg

Overall size

Length

850mm (transportation 5550mm)

Width

3000mm (transportation 2494mm)

Height

2450mm

Engine

Model

F4L912

Type

Air cooling with 4 cylinders

Power

46Kw/2000r/min

Diesel oil tank capacity

143L

Drive system

The machine is driven by mechanical and hydraulic, flywheel is connected to transfer case, the front is connected to double pump, supplying power for mechanism below:
Traveling device:Conveyor and auger spreading device
Vibrating:Up and down of screed, turnover of hopper and action of cylinders

Traveling device

It is made up of transfer case, gear box with two grades, differential mechanism, semi-axle and chain drive. Traveling is driven by driven chain wheel.

Load mode

6 tyres, the front tyres are solid, the rear tyres are pneumatic

Steering

Steering mechanism use mode of bridge, center of bridge which is able to revolving is connected to center of frame, redirectors are fixed on the two ends of the axle, redirectors are revolved by hydraulic cylinder, and so solid tyre can be revolved corresponding angle.

Hopper

Hopper capacity is about 10 tons; hopper is turned by hydraulic cylinder to discharge material.

Roller

It is used to push the rear tyre of camion.

Conveyor

It is independently driven, clutch for conveyor is controlled by hydraulic cylinder, power is transferred by chain-wheel to drive scraper.

Electric system

It has 2 batteries, system voltage is 24V.

Cab

It used framework of steel tubes which are put together and equipped canopy.

Automatic level device

It is equipped one slope and one grade Automatic level device, used for automatic adjustment of slope and grade.

Working device

Double sets of hydraulic stretching iron plate

Basic width of iron plate

2500mm

Hydraulic Extension width of iron plate

1000mm each side

Arch adjustment

0~4%

Vibrating frequency

50HZ